Products: Filtra-Systems STiR Industrial Water Filter
Industrial Water Purification Systems | STiR Industrial Water Filter
DISCOVER the next generation of industrial water filter systems
Filtra-Systems has provided industrial manufacturers with thumb-up industrial filtration systems for four decades.
The patented STiR fluidization technology has been validated in production and mathematically proven to clean 100% of the filter media during each backwash cycle.
This effectiveness makes the STiR industrial water filter unmatched among industrial water purification systems.
When compared to older technologies like sand, anthracite, and carbon media filters which do not completely fluidize the media during backwash and are highly susceptible to media fouling, the STiR wins, hands down.
Removing suspended solids and oil, the STiR doubles your throughput efficiency compared to conventional sand filters or graded mixed media filters.
Under normal operating conditions, the STiR removes 95% to 99% of suspended solids and 90% to 99% of insoluble hydrocarbons, without expensive hazardous chemicals.
how The stir works
As contaminants are captured and flow is restricted, a vacuum pressure builds.
Once the vacuum pressure reaches its designated set point, the regeneration cycle is automatically triggered, the media is cleaned, and the contaminants are removed.
This process is verified via the visual indicating media bed sight glass located on each unit, and return of the vacuum pressure to its clean bed set point of 0 inches Hg.
Once proper vacuum pressure is reached, the STiR industrial water filter begins the patented media cleaning/regeneration process. All flow is eliminated and the agitator becomes energized to completely stir the tank.
The philosophy is all of the filter media and contaminants captured become a homogeneous mixed slurry in the filter tank.
Already mixed, process water is allowed to enter via the filter inlet, while the pump pulls the liquid containing all of the contaminants out through the backwash exit pipe.
The filter media remains in the industrial water filter during this cycle by the backwash screen, next, contaminated water flows through and is sent to upstream processing or waste handling. Learn more about the benefits of and what makes it the most efficient filtration system on the market.
engineered & Supported to meet your REQUIREMENTS
Single filtration units are able to process 50 to 6,500 gpm each, depending on the application.
These industrial water purification systems are pre-assembled and shipped to your site, skid mounted, ready for installation.
Units that have a diameter greater than 20' have filtration tanks designed in easily shipped and site assembled sections, to minimize freight and installation costs while maximizing single unit throughput.
contact us today!
Before you make up your mind, wouldn't it make sense to gain all the information about the STiR industrial water filter to ensure you make an informed decision?
When you click here to Contact us now or call 248-427-9090. We'll help you get the perfect industrial water purification system for your application.
Our Deep Bed Filter product was used to improve the caster oil filtration process at a Mittal Steel plant. Visit us to learn how this filter works and more.
We replaced this metal processing company's sand filters with our STiR filter and they quickly improved their process efficiency while reducing cost. Discover more here!
Our STiR filter was successfully used to clean the wastewater from a fish hatchery, which is sent to a fish bearing stream. Learn more here!
The Filtra-Systems STiR filter is an excellent solution for removing suspended solids and oils from casting water in aluminum processing. Learn more here!
Use Filtra-Systems' STiR filter to remove solids & oils from water for a more efficient salt water filtration solution than traditional bag or cartridge filters.
We implemented our STiR filter to greatly improve the processing of CCA at an AV CELL facility in New Brunswick. Contact us to find out how we can help you!
In this project, Filtra-Systems filtration products were used to reduce oil and solids concentration in water to less than 1.0 ppm. Find out more here!